Dual Battery Charger for DWT-B03R Transmitter

The Sony BC-DWX1 battery charger can be used to charge the DWT-B03 or NP-BX1 (battery provided with the DWT-B03). It can be powered by PoE or a power supply (not provided). An LED status bar is also featured on the BC-DWX1 and for extra monitoring, you can also connect via ethernet to Sony’s Wireless Studio software.

The BC-DWX1 is also a good way to store and transport your belt packs/batteries with 6 units (12 charging slots) fitting into 1 x rack draw.

BC-DWX1

Flexible charging options and remote status monitoring
  • This dual charger is designed for use with the DWT-B03R DWX Series wireless transmitter and NP-BX1 battery pack.
  • 2-way powering allows operation with either AC adaptor* or PoE (Power Over Ethernet).
  • Battery charging status can be monitored and controlled remotely using Wireless Studio PC software.
  • Storage charging mode is available for long-term battery storage.
  • Multiple units can be connected with tie wraps.

    *Please note: AC adaptor is not included.
Power requirementsWhen the PoE device is used: 48 V DC When the AC adapter is used: 12 V DC
Current consumption When the PoE device is used: 260 mA or less When the AC adapter is used: 1.2 A or less
Rated output (Charging)DC 4.2V, 0.86A (per 1 slot)
LAN ConnectorRJ45-type (1) 100BASE-TX:Conforms to IEEE802.3u 10BASE-T:Conforms to IEEE802.3
PoE power receptionConforms to IEEE802.3af
Operating temperature 0 °C to 40 °C (32 °F to 104 °F) (unit only)
Storage/Transport Temperature –20 °C to +60 °C (–4 °F to +140 °F)
Supplied accessoriesBefore Using this Unit (1) CD-ROM (1)
Dimensions (W x H x D)Approx. 186x71x91 mm
Mass Approx. 290 g